Buy electrodes for surfacing best at VATRA LLC! Electrodes for surfacing.

In cases where electrodes for manual arc welding of metal with a special surface are required, electrodes for surfacing are used. They are manufactured in accordance with GOST 9466-75 and GOST 10051-75.

Other welding electrodes are also used for surfacing, for example, stainless steel electrodes and other welding electrodes for high-alloy steels. We offer to buy electrodes for surfacing at the most favorable prices from the manufacturer.

In accordance with GOST 10051-75, welding electrodes for surfacing are divided into 44 types based on the chemical composition of the deposited metal and hardness at typical temperature. As an example, the following types can be noted: E-16G2KhM, E-110Kh14V13F2, E-13Kh16N8M5S5G46.

Often, the deposited metal of most welding electrodes is regulated by the manufacturer in the company’s technical specifications.

Welding electrodes for surfacing can be conditionally divided into six groups in accordance with the generally accepted alloying system and work rules:

• 1. The first group includes electrodes for surfacing that make it possible to obtain deposited metal with low carbon content and low-alloy parameters. They are suitable for obtaining increased resistance to metal friction and impact loads.
  2. The second group includes welding electrodes for surfacing with medium carbon content and low-alloy deposited metal. They are suitable for use in areas with increased friction and impact resistance at normal temperatures and temperatures up to six hundred fifty degrees.
  3. The third group ensures the production of deposited metal with carbon and alloyed metal for use in areas where abrasive friction and impact processes occur.
  4. The fourth group includes electrodes for surfacing with the same characteristics as the third group, but for use under high pressure and at elevated temperatures up to eight hundred fifty degrees.
  5. The fifth group. Welding electrodes make it possible to obtain a high-alloy austenitic deposited metal joint to create a resistant joint under corrosive-erosion wear and metal abrasion at high temperatures (from five hundred to six hundred degrees).
  6. The last, sixth group includes welding electrodes that make it possible to obtain dispersion-strengthened high-alloy deposited metal with high resistance under severe temperature-deformation conditions at temperatures up to one thousand one hundred degrees.

The production process. Electrodes for surfacing.

In conclusion, it is worth noting that the production process when working with surfacing of welding electrodes for manual arc welding requires special skills and a specific technique. Here, it will vary and differ according to the chemical composition and the metal to be welded.

Mandatory work includes preheating and post-heating, heat treatment, and other operations necessary to achieve the stated requirements when surfacing metal with a welding electrode.

You can buy surfacing electrodes from our company at the lowest prices. Always in stock at our warehouse in Minsk with delivery throughout Belarus and Russia. Call right now or place an order through the website.

We respond quickly to questions on Telegram